In this guide
Published dental guidance says a sports gum shield should be thickest over the front of the top front teeth. The European Association for Sports Dentistry recommends a minimum of 3 to 4 mm on the front surface of the central incisors, at the top of that range for high risk contact sports, and 1.5 to 2 mm over the biting edges of the front teeth, with as little as possible behind the teeth while still holding the guard in place. Above that, comfort and fit matter as much as extra material.
Why thickness matters
A gum shield works partly by spreading and absorbing the force of a hit. World Rugby's guidance names two things that decide how well a guard does that: its fit, so it is retained easily and spreads forces correctly, and its ability to absorb energy, which depends on material and thickness. More material over the front teeth gives more to absorb a blow. But a guard is only useful if it stays in your mouth, and a guard that is too bulky gets taken out.
Thickness also works alongside coverage. A thick front with nothing behind it leaves the back teeth exposed and makes the guard easier to knock loose. The European Association for Sports Dentistry recommends a custom guard extends at least as far back as the far side of the first upper molars, so the whole guard can stay put and share the load.
What the guidance says, part by part
| Part of the guard | General guidance | Source |
|---|---|---|
| Front surface of the top front teeth | Minimum of 3 to 4 mm, the upper end for high risk contact sports | European Association for Sports Dentistry |
| Biting edges of the front teeth | 1.5 to 2 mm | European Association for Sports Dentistry |
| Behind the teeth, on the palate side | As little as possible while keeping retention | European Association for Sports Dentistry |
| Overall | As thin as possible while staying effective for the sport | FDI World Dental Federation |
A 2026 scoping review also cites older consensus guidance of at least 3 mm on the front and biting surfaces and 2 mm on the palate side, and points out that many studies do not report thickness at all. So these are sensible guide figures, not a precise rule.
Thickness by sport
The guidance groups sports by risk rather than naming each one. Here is how that tends to apply.
| Sport | Risk to the front teeth | What it means |
|---|---|---|
| Boxing, MMA, kickboxing, Muay Thai | Direct, repeated strikes | Towards the upper end over the front teeth, with a close fit |
| Rugby | Collisions, heads, knees, elbows | Towards the upper end; fit matters for breathing and calling |
| Hockey | Stick and ball impacts | Good cover over the front teeth |
| BJJ and wrestling | Accidental knocks, constant breathing | Comfort and breathing weigh more; a slimmer fit is often preferred |
| Karate, taekwondo | Varies with the rules on contact | Match it to how much contact you spar with |
If you are unsure, ask your dentist, coach or the governing body for your sport.
Your own risk also depends on how you take part, not just the sport. Hard sparring every week is not the same as technique drills, and a senior contact player faces different knocks from someone playing a social game. The guidance is a starting point: think about how often you take contact, and at what level, when you choose.
Why thicker is not always better
- Breathing. A bulky guard makes it harder to breathe hard through your mouth.
- Speech. Players need to call, and the FDI says a guard should not interfere with speech or breathing.
- Gagging. Extra material at the back and on the palate can make you gag.
- Wearing it at all. The most protective guard is useless in your kit bag.
Thickness also changes with use. A small study of football players found the material over the front teeth thinned by about 16% across a season, which is one reason to check a guard often. Our guide to how long gum shields last covers the signs of wear.
Checking your own guard
You do not need a measuring tool to spot a guard that has gone too thin. Hold it up to a light and look at the front: if you can see light coming through clearly where your front teeth sit, or you can feel your teeth through it when you press, it has thinned. Look at the biting surfaces at the back as well. Chewing tends to wear those first, and a flat, shiny patch or a hole means it is time to replace it. Compare it with a new guard if you have one, or with photos from when you first got it.
What about boil and bite guards?
With a guard you mould yourself, the final thickness depends on how you bite. Biting hard while it is soft can squash the material thin, sometimes right through. That is one reason the RFU says boil in the bag and pre moulded guards generally give a reduced level of fit and protection. Our custom vs boil and bite page goes into the difference.
How we approach thickness at Piranha
Our guards are not one even thickness all over. They are thicker over the front teeth for protection and thinner elsewhere for comfort and breathing, and they cover the top teeth up to and including the second molars. Each one is made in dental grade EVA at our lab in Glasgow, on a model made from your own impression, so the thickness is set in the lab rather than by how hard you bite. You can see our boxing gum shields and rugby gum shields, or start a design in the live 3D builder.
This guide is general information, not medical advice.
How thick should a boxing gum shield be?
General guidance from the European Association for Sports Dentistry is a minimum of 3 to 4 mm over the front of the top front teeth, at the upper end for high risk contact sports such as boxing.
Is a thicker gum shield better?
Only up to a point. Thickness over the front teeth helps absorb a hit, but a guard that is too bulky makes breathing and talking harder and often gets taken out.
How thick is a Piranha gum shield?
Ours are thicker over the front teeth for protection and thinner elsewhere for comfort and breathing, rather than one thickness all over.
Does a boil and bite gum shield keep its thickness?
Not always. Biting into it while it is soft can squash the material thin, so the final thickness depends on how it was moulded.
Does a gum shield get thinner with use?
Yes. Chewing, clenching and impacts wear it down, so check it regularly and replace it when it is worn.
Sources
- European Association for Sports Dentistry, Position statement and recommendations for custom made sport mouthguards (Dental Traumatology, PubMed Central)
- FDI World Dental Federation policy statement, Sports mouthguards (International Dental Journal, PubMed Central)
- Perrotta and colleagues, Custom made versus non custom mouthguards: a scoping review (Bioengineering 2026, PubMed Central)
- World Rugby Rugby Ready: Equipment, environment and emergency plan
- Del Rossi and colleagues, Structural changes to mouthguards during 1 season of high school football (Journal of Athletic Training, PubMed Central)
This guide is general information, not medical advice.







